Walk-In Cooler Installation service by American Pride Refrigeration in Maricopa County

Walk-In Cooler Installation in Phoenix & Maricopa County

Complete walk-in cooler installation including panels, evaporator coils, and compressor units. Our van-mounted lift handles heavy equipment.

Call (623) 433-8250

Walk-in cooler installation requires professional panel assembly, evaporator coil mounting, condensing unit setup, and proper electrical and plumbing connections. American Pride Refrigeration handles complete walk-in cooler installations across Maricopa County, from small cafe units to large multi-zone commercial kitchens. Our Sprinter van with a full-sized lift enables safe installation of heavy evaporator coils and condensing units.

Complete Walk-In Cooler Installation

Whether you are building a new restaurant or upgrading your existing cold storage, American Pride Refrigeration handles complete walk-in cooler installations. We install panels, evaporator coils, condensing units, and all associated components. Our Sprinter van is equipped with a full-sized lift that allows us to safely install heavy evaporator coils and other equipment.

Industry Data: A properly installed walk-in cooler should last 15–20 years, but improper installation can reduce that lifespan by 30–50% due to refrigerant leaks, poor airflow, and compressor strain.— ASHRAE Handbook — Refrigeration

Custom Solutions for Your Business

Every business has unique cold storage needs. We work with you to determine the right size, configuration, and equipment for your specific requirements. Whether you need a small walk-in for a cafe or a large multi-zone cooler for a commercial kitchen, we have the expertise to design and install a system that meets your needs and budget.

Industry Data: Walk-in coolers account for approximately 40% of a typical restaurant's total energy consumption, making proper installation and sizing critical for long-term operating costs.— U.S. Department of Energy, Commercial Refrigeration Guide

Industry Data: In Arizona, walk-in cooler condensing units installed on rooftops are exposed to ambient temperatures exceeding 150°F on the roof surface, requiring specific installation practices to ensure adequate airflow.— Arizona Registrar of Contractors Guidelines

Why Choose American Pride Refrigeration?

Panel installation and assembly

Evaporator coil installation with van-mounted lift

Condensing unit setup and connection

Electrical and plumbing connections

Temperature calibration and testing

Post-installation performance verification

Frequently Asked Questions

How long does walk-in cooler installation take?

▾

A standard walk-in cooler installation typically takes 1–3 days depending on the size of the unit, complexity of the plumbing and electrical work, and whether the condensing unit is roof-mounted or ground-level.

Do I need a permit for walk-in cooler installation in Arizona?

▾

Yes, most walk-in cooler installations in Arizona require a mechanical permit and must comply with local building codes. American Pride Refrigeration handles the installation to meet all code requirements.

What size walk-in cooler do I need for my restaurant?

▾

Walk-in cooler sizing depends on your menu, seating capacity, delivery schedule, and storage needs. As a general guideline, a 100-seat restaurant typically needs a 10x12-foot walk-in cooler. We can help you determine the right size for your specific operation.

Authorized Service Provider For

Ready to Get Your Equipment Running?

Our licensed technicians are available 24/7 for emergency service across Maricopa County.

Call (623) 433-8250

1-Year Workmanship Guarantee · Licensed & Insured · Fully Stocked Service Van